電子樣本油研流量控制閥A10-L-R-01-H-K-10

　　方向控制閥

　　上海乾拓貿易有限公司

　　電 話：021-39529830-8012

　　手 機；18917074297

　　報價QQ；2880626083

　　郵箱；18917074297@163.com

　　聯系人：楊婷玉

　　地址：上海市嘉定區江橋嘉涌路6號樓713

　　Control and Check Valves ...

　　液壓操作的先導活塞機構

　　控制孔口的開口面積

　　閥門。 隨著這些閥門的使用，無震動

　　無論是加速還是減速都可以

　　獲得。 用補償器的壓力和

電子樣本油研流量控制閥A10-L-R-01-H-K-10

　　溫度穩定，流量控制Recommended Viscosity and Oil Temperatures

　　Viscosity ranging between 15 - 400 mm2 /s (77 - 1800 SSU).

　　Oil temperatures between -15/+70°C (5 - 158°F).

　　Use hydraulic fluids which satisfy the recommended viscosity and oil t

　　emperatures given above.

　　Control of Contamination

　　Due caution must be paid to maintaining control over contamination of t

　　he hydraulic fluids which may otherwise

　　control flow

　　rate of the hydraulic circuit and eventually control

　　speed of the actuator precisely.

　　Valves with an integral check valve allow a controlled

　　flow and reverse free flow. Repeated lead to breakdowns and shorten the

　　life of the valves. Please maintain the degree of contamination within

　　Grade 12. Use 25 μm or finer line filter.

　　Any type of hydraulic fluids listed in the table below can be used.

　　These valves are pressure and temperature compensating

　　type valves and maintain a constant flow rate

　　independent of change in system pressure (load) and

　　temperature (viscosity of the fluid). They resetting

電子樣本油研流量控制閥A10-L-R-01-H-K-10